Table of Contents
Advertisement
Configuring/Starting Job Flow
Job flow is a feature for executing a series of registered actions.
A job flow operates on documents stored in a mailbox, and starts in either of the
following ways: 1) manually or automatically start a job flow when a document is stored
in a mailbox, or 2) select a job flow to act on documents stored in a mailbox.
To start a job flow automatically, you must link a mailbox to the job flow in advance.
Documents are automatically processed by the job flow when they stored in the
mailbox.
Important • If the Authentication feature is not used, a job flow created in [Check Mailbox] can only be
Features that can be registered are listed below.
Forward
Multiple forwarding recipients can be configured for each forwarding method.
Important • The following feature is not available for some models. An optional package is necessary.
FTP
Forwards via FTP. Up to 2 recipients can be specified.
SMB
Forwards via SMB. Up to 2 recipients can be specified.
E-Mail
Forwards via E-mail. Up to 100 recipients can be specified.
Fax
Forwards via fax. Up to 100 recipients can be specified.
iFax
Forwards via iFax. Up to 100 recipients can be specified.
Print
Documents in a mailbox can be printed.
Some features are unavailable depending on the store type of the document.
Input
Fax Documents for
Private Polling
Scan
Fax to Mailbox
iFax to Mailbox
O : Available
X : Not available
: Depends on the setting in the system administrator mode
used/edited/duplicated/deleted through the mailbox where the job flow is created. This type
of job flow is not displayed on the [Job Flow Sheets] screen. When using the Authentication
feature, job flows whose owners are authenticated are displayed on the [Job Flow Sheets]
screen.
• To use job flows, a HDD is necessary.
For more information, contact our Customer Support Center.
Output
Print
O
O
O
O
iFax
Fax
E-Mail
Send
O
O
X
X
O
O
O
Configuring/Starting Job Flow
FTP
SMB
O
O
O
O
O
O
O
O
O
O
O
6
201
Advertisement
Table of Contents
