Table of Contents
Advertisement
16 Problem Solving
Error Code
033-722
033-724
033-725
033-726
033-727
033-728
033-730
16
033-731
033-733
033-734
033-735
033-736
033-737
486
Category
C P F S M O
O
[Cause]
[Remedy] Remove the jammed paper or reduce the document
O
[Cause]
[Remedy] Attach a HDD or 256MB Memory to increase the
O
[Cause]
[Remedy] Remove unnecessary data from the hard disk to increase
O
[Cause]
[Remedy] No operation is necessary.
O
[Cause]
[Remedy] No operation is necessary.
O
[Cause]
[Remedy] No operation is necessary. The machine will
O
[Cause]
[Remedy] Power-cycle the machine. If the machine is not improved
O
[Cause]
[Remedy] The Auto Print processing of the received fax document
O
[Cause]
[Remedy] Power-cycle the machine. If the machine is not improved
O
[Cause]
[Remedy] No operation is necessary.
O
[Cause]
[Remedy] Power-cycle the machine. If the machine is not improved
O
[Cause]
[Remedy] No operation is necessary.
O
[Cause]
[Remedy] Try again after waiting for a period.
Cause and Remedy
The document is jammed, or the document pages are
over the limit.
pages, and retry sending.
The reception was interrupted because the image volume
exceeded the upper limit.
maximum volume of image data.
The hard disk is full.
free disk space.
The received document was printed with the single sided
printing, because the 2-sided printing is not available for a
document with multiple size pages.
The received page was printed without being rotated,
because its data volume was too large to change the
orientation automatically.
The Auto Print formatting of the received fax document
was interrupted by a manual print operation.
automatically start the Auto Print job after manual
printing.
An error occurred during fax transmission.
by performing the relevant remedy, contact our Customer
Support Center.
The print job for the received fax document was
interrupted.
was interrupted by a manual print operation. No operation
is necessary.
An error occurred during fax transmission.
by performing the relevant remedy, contact our Customer
Support Center.
The print job of the received fax document was
interrupted by a report job.
An error occurred during fax transmission.
by performing the relevant remedy, contact our Customer
Support Center.
The forwarding job was interrupted because the data
volume exceeded the upper limit.
An error occurred during fax transmission.
Advertisement
Table of Contents
