Table of Contents
Advertisement
16 Problem Solving
Error Code
034-507
034-508
034-509
034-510
034-511
034-512
034-515
034-519
16
034-520
034-522
034-523
034-528
034-529
034-530
034-703
034-704
034-705
034-706
488
Category
C P F S M O
O
[Cause]
[Remedy] Check the password and the phone number.
O
[Cause]
[Remedy] Check the settings and the phone number, and send the
O
Refer to 034-508.
O
[Cause]
[Remedy] Check the abbreviated number of the relay broadcast.
For more information on the remote relay broadcast feature, refer to
"Remote Relay Broadcast (Performing Relay Broadcast to Remote
Locations)" (P.148).
O
[Cause]
[Remedy] Check the condition of the destination machine.
O
[Cause]
[Remedy] Wait until the waiting jobs decrease, or reduce the
O
[Cause]
[Remedy] Wait until the waiting jobs decrease, and try again.
O
[Cause]
[Remedy] Wait until the job in communication is completed, and try
O
[Cause]
[Remedy] Retry after waiting for a period.
O
[Cause]
[Remedy] Try again after the dialing.
O
[Cause]
[Remedy] Check the following:
O
[Cause]
[Remedy] Operate within a specified time.
O
[Cause]
[Remedy] Check the phone cable connection, and send the fax
Cause and Remedy
The specified password is not identical with the ID
number of the destination machine.
The destination machine may be set not to send its ID
number. Check the setting of the destination machine.
This error code also appears when polling is rejected.
An error occurred during fax transmission.
fax again. If the machine is not improved by performing
the relevant remedy, contact our Customer Support
Center.
An infinite loop was detected on the remote relay
broadcast.
Check also the abbreviated number registered in the
relay station.
The destination machine has a problem.
The number of destinations specified for the broadcast
transmission exceeded the upper limit.
number of destinations, and try again.
The number of waiting jobs exceeded the upper limit.
There is no line available for the manual communication.
again.
Unable to accept jobs.
Manual communication is not available during dialing.
Paper with the same size as the received document is not
loaded on the machine.
Check the sizes of paper loaded on the machine.
Check if the paper trays are correctly inserted.
Operation time out
The phone cable is not correctly connected.
again. If the machine is not improved by performing the
relevant remedy, contact our Customer Support Center.
Advertisement
Table of Contents
