Table of Contents
Advertisement
Custom Buttons 1 to 3
Assign features to the custom buttons on the control panel: Custom 1 to Custom 3.
To leave a feature unassigned, select [Not Set].
The following example shows how to allocate a feature to the Custom 2 button. You
can allocate features to the Custom 1 and 3 buttons with the same procedure.
Note
1
Select [Custom Button 2], and
select [Change Settings].
2
Select the feature to be assigned.
Note
Job Type on Job Status Screen
Select the job types to be shown on the [Completed Jobs] screen of the [Job Status]
screen when the <Job Status> button on the control panel is pressed.
Select from [All Jobs], [Fax/E-mail/Scan Jobs], [Auto Transfer Jobs], and [Print Jobs].
Default Language
Select the language displayed on the machine.
There are two ways of selecting the language: set in the System Administration mode,
and set by ordinary users.
Setting in the System Administration mode
The language set here is the standard language that is retained even when the
machine is powered off and on.
Setting by ordinary users
The language setting in [Language] in the [All Services] screen is lost when the
machine is powered off.
Important • When set to [English], do not use characters other than ASCII characters.
Paper Tray Settings
Set the items relating to the paper and trays, including the types and precedence of
paper loaded in the trays.
1
Select [Paper Tray Settings].
2
Select the item to be set.
3
Select the item to be set or
changed, and select [Change
Settings].
4
Set the setting value.
5
Select [Save].
• The operation settings can be registered in the [Stored Programming] screen. For
information on Stored Programming, refer to "Registering Stored Program" (P.214).
• The default setting of [Custom Button 1] is [Copy].
• Select [
] to return to the
previous screen or [
] to
move to the next screen.
Common Settings
11
271
Advertisement
Table of Contents
