Table of Contents
Advertisement
16 Problem Solving
Error Code
016-703
016-704
016-705
016-706
016-707
16
016-708
016-710
016-711
016-712
016-713
016-714
016-716
474
Category
C P F S M O
O
[Cause]
[Remedy] Take one of the following actions:
O [Cause]
[Remedy] Remove unnecessary documents from the mailbox, and
Refer to "Printing/Deleting Documents in the Mailbox" (P.198).
O
[Cause]
[Cause]
Refer to "Secure Print" (P.375).
O
[Cause]
[Remedy] Remove unnecessary documents from the machine, and
For information on deleting Secure Print users, refer to "Secure Print"
(P.375). For information on deleting documents, refer to "Printing/Deleting
Documents in the Mailbox" (P.198) and "Printing and Deleting Stored
Documents" (P.373).
O
[Cause]
[Remedy] A HDD is required for the Sample Print feature. If the
O
[Cause]
[Remedy] Remove unnecessary data from the hard disk to increase
O
[Cause]
[Remedy] A HDD is required for the Delayed Print feature.
O Refer to 016-985.
O
Refer to 003-751.
O [Cause]
[Remedy] Input the correct password.
O [Cause]
{Remedy] Create a new mailbox or specify an existing mailbox.
O
[Cause]
[Remedy] Remove unnecessary documents and users from the
Refer to "Printing/Deleting Documents in the Mailbox" (P.198).
Cause and Remedy
Received e-mail specifying a non-registered or invalid
mailbox number.
Create a new mailbox with the specified number and
request the sender to send it again.
Request the sender to send to a valid mailbox.
The mailbox is full, and hard disk capacity is insufficient.
save the document.
Unable to register the Secure Print document because a
HDD is unattached.
A HDD is required for the Secure Print feature.
The hard disk space is insufficient because Secure Print
users exceeded the allowed number.
delete unnecessary Secure Print users.
Unable to print with the Sample Print feature because a
HDD is unattached or defective.
HDD is defective, contact our Customer Support Center.
Unable to annotate due to insufficient hard disk space.
free disk space.
Unable to register the Delayed Print document because a
HDD is unattached.
The input password does not agree with the password set
to the mailbox.
The specified mailbox does not exist.
Unable to spool the TIFF file due to insufficient disk
space.
machine, and then attach the hard disk. For information
on attaching the hard disk, contact our Customer Support
Center.
Advertisement
Table of Contents
