Table of Contents
Advertisement
Millimeters/Inches
Select whether dimensions on the screen are shown in millimeters or inches.
Keyboard Input Restriction
Select whether to restrict the display of the virtual keyboard on the machine. To prevent
characters being garbled when switched from one character set to another, you can
restrict the input to ASCII characters only. If you select [On (Standard ASCII only)], the
displayed keyboard shows ASCII characters only.
Operation of Up/Down Buttons
Select whether or not to continue scrolling when the scroll buttons are held down.
Disable Fast Scrolling
Holding down the scroll buttons does not scroll.
Enable Fast Scrolling
Holding down the scroll buttons causes continuous scrolling.
Display Consumables Screen
Set whether the machine displays the consumable status when consumables need to
be replaced.
Off
Do not display the consumable status screen.
When power is switched on
Status is displayed at startup.
When Auto Clear is activated
Status displayed when Auto Clear is executed.
Overwrite Hard Disk
Select whether or not to carry out hard disk overwrite erasing. If so, you can select
whether to overwrite once or three times.
After deleting data from the hard disk, the area on which the data was stored is
overwritten. This feature prevents unauthorized retrieval or restoration of the data
recorded on the hard disk. It also applies to copy source, and other information stored
temporarily by the system.
Important • If the machine is powered off during the overwriting operation, unfinished files may remain
Note
For information on how to check the status during the overwriting process, refer to "Overwrite Hard
Disk" (P.387).
on the hard disk.
• The data is erased by overwriting once, but overwriting three times makes it even more
definite that the data cannot be recovered. It does, however, take longer.
• During the overwriting process, processing of normal operations may be slowed down.
• This feature does not appear for some models. An optional package is necessary. For
information, contact our Customer Support Center.
Common Settings
11
285
Advertisement
Table of Contents
