Table of Contents
Advertisement
7
Pull the lever of the end guide up and
move it along the slot (1). Set the
lever at the position corresponding to
the paper size (2) and press the lever
down (3).
Note
• The slot on the left of 8.5" is
not used.
Important • Set the guide to gently touch
the edge of the paper. If the
position of the guide is not
correct, the paper may not be
fed properly and cause paper
jams.
8
Open the end guide (1), and load
and align the edge of the paper
against the right edge of the tray
with the side to be copied or printed
on face up (2).
Important • Do not load paper exceeding
the maximum fill line. It may
cause paper jams or machine
malfunctions.
9
Close the end guide tightly.
10
Push the tray in gently until it comes to a stop.
Changing the Paper Size for the Trays
10
245
Advertisement
Table of Contents
