Table of Contents
Advertisement
4 Fax
Facsimile Information Services
For information on subscriptions and advanced operating procedures, contact the
corresponding facsimile information service.
Using the Receiver
1
Pick up the receiver of the external
telephone.
2
Select [Manual Receive].
4
3
Specify the fax number of the
facsimile information service.
Note
4
When the machine connects to the service, you will hear voice prompts. Follow the
voice prompts to enter the required numbers.
5
When input is finished, press the <Start> button.
Note
6
Replace the receiver.
Important • Be sure to replace the telephone properly. Otherwise, the line will remain in the busy state.
156
Specify the fax number with the numeric keypad, address number, or one touch
buttons. You cannot use the address book.
The keyboard displayed when
selecting [Alphanumeric] or
[Symbol] can also be sued.
• When the line type is set to a
pulse line, [Tone (:)] does not
appear.
• When you are using a dial line, select [Tone (:)] if you want to send out touch-tones (for a
service requiring the use of a pulse line).
• Depending on the service, even with the tone transmission operation, it may not be possible
to obtain the service.
• The <Online> indicator on the control panel lights and reception begins.
Advertisement
Table of Contents
