Table of Contents
Advertisement
No
Part of the image is
missing.
No
The image is not the
desired size.
No
The image is rough.
Cause
The setting for [Original Type] is inappropriate for the
document.
Action
Select an image quality type appropriate for the document.
Refer to "Original Type (Selecting the Document Type)"
(P.180).
Cause
The document is pasted or folded.
Action
There may be a gap between the document glass and the
pasted or folded section. Place a stack of white sheets on
the document to remove the gap.
Cause
The document glass or the document cover is dirty.
Action
Clean the document glass or the document cover.
Refer to "Cleaning the Document Cover and Document Glass"
(P.439).
Cause
The document is a transparent type such as a
transparency film.
Action
Place a white sheet of paper on the document when
scanning.
Cause
The document is misaligned.
Action
Load the document correctly.
Refer to "Step 1 Loading Documents" (P.160).
Cause
The document guides on the document feeder are not in
the correct positions.
Action
Load the document correctly, and align the document
guides with the document.
Refer to "Step 1 Loading Documents" (P.160).
Cause
The document is a non-standard size.
Action
Specify the document size.
Refer to "Scan Size (Specifying a Scanning Size)" (P.184).
Cause
The document is folded.
Action
Unfold and correctly place the document.
Refer to "Step 1 Loading Documents" (P.160).
Cause
The resolution is too low.
Action
Set the resolution higher.
Refer to "Scan Resolution (Specifying a Scanning Resolution)"
(P.182).
Trouble during Scanning
469
16
Advertisement
Table of Contents
