Table of Contents
Advertisement
Category
Error Code
C P F S M O
027-712
027-713
027-714
027-715
027-716
027-720
027-721
027-722
027-723
027-724
027-725
027-726
O
[Cause]
The received S/MIME certificate has expired, or is an
unreliable certificate.
[Remedy] Ask the sender to send the e-mail with a valid S/MIME
certificate.
O
[Cause]
The received e-mail has been discarded because it might
be altered on its transmission route.
[Remedy] Tell the sender about it, and ask to send the e-mail again.
O
[Cause]
The received e-mail has been discarded because the
address in its From field was not the same as the mail
address in the S/MIME signature mail.
[Remedy] Tell the sender that the mail addresses are not identical,
and ask to send the e-mail again.
O
[Cause]
The received S/MIME certificate has not been registered
on the machine, or has not been set to use on the
machine.
[Remedy] Import the sender's S/MIME certificate to the machine, or
change settings to use the S/MIME certificate on the
machine when the S/MIME certificate has already been
registered.
O
[Cause]
The received S/MIME certificate has been discarded
because the certificate was unreliable.
[Remedy] Ask the sender to send the e-mail with a reliable S/MIME
certificate.
O [Cause]
Unable to find the server of an application interface
destination.
[Remedy] Check the DNS server address. Or, check whether or not
the computer that the application (CentreWare Flow
Service) is installed on has been registered on the DNS
server.
O [Cause]
An application interface destination does not exist.
[Remedy] Check whether an application linked (CentreWare Flow
Service) operates correctly.
O [Cause]
The jobs was timed out during connection with an
application interface destination.
[Remedy] Try to process the job flow again.
O [Cause]
Authentication at the application interface destination
(CentreWare Flow Service) fails.
[Remedy] Check a user name and password that is used when
creating a job flow.
O
[Cause]
An application interface destination could not be
accessed.
[Remedy] Check whether CentreWare Flow Service operates
correctly. When it is operating, check the log.
O [Cause]
A job operation failed using an application interface.
[Remedy] Check whether an application linked (CentreWare Flow
Service) operates correctly. When it is operating, check
the log. When it is not operating, check the network
environments.
O
[Cause]
The job status is unclear during an application interface.
[Remedy] Check whether CentreWare Flow Service operates
correctly. When it is operating, check the log.
Cause and Remedy
Error Code
16
483
Advertisement
Table of Contents
