13 Machine Status
Consumables
You can check the status of consumables on the [Consumables] screen. The status of
consumables is shown as "Ready", "Replace Soon", or "Replace Now".
The following describes the procedure for checking the status of consumables.
For information on replacing consumables, refer to "Replacing Consumables" (P.426).
1
Press the <Machine Status>
button.
2
Select the [Consumables] tab.
On the [Consumables] screen, you can check the following items.
Note
13
Important • If using a partly consumed toner cartridge (such as a toner cartridge removed from another
402
• Items displayed may vary depending on installed options.
• Staple Cartridge : Displayed when a B Finisher, C Finisher, or C Booklet Finisher is
installed.
• Hole Punch Container (R4) : Displayed when a C Finisher, or C Booklet Finisher is
installed.
• Booklet Staple Cartridge : Displayed when a C Booklet Finisher is installed.
Toner Cartridge
Drum Cartridge
Staple Cartridge (R1)
ApeosPort 550 I/450 I /350I, or DocuCenter 550 I/450 I unit), the status shown may not
match the actual remaining amount. When replacing toner cartridges, we recommend you
use new ones.
Booklet Staple Cartridge (R2)
Booklet Staple Cartridge (R3)
Hole Punch Container (R4)