Scan To Ftp/Smb; Transfer Protocol - Fuji Xerox ApeosPort 450 I User Manual

Table of Contents

Scan to FTP/SMB

You can convert scanned data to TIFF, DocuWorks, or PDF format, and then use the

FTP or SMB protocol to send the data to a computer on the network. The following

shows the reference section for each feature.

Address Book ........................................................................................................................... 176

Specifying a Forwarding Destination....................................................................................... 176

Select [Scan to FTP/SMB] on the

[All Services] screen.

Specify a forwarding destination on the [Save in] screen.

Transfer Protocol

You can select a transfer protocol using the following procedure.

Select [Transfer Protocol].

Select any item.

Transfers using the FTP protocol.

Transfers using the SMB protocol.

SMB (UNC format)

Transfers using the SMB protocol (UNC format).

• Before scanning, a shared folder must be created on the computer for saving scanned data.

If the FTP protocol is used, the FTP service must be set. For information on the computer

settings, refer to the documentation supplied with your operating system. For information on

compatible operating systems, refer to "ApeosPort 550 I/450 I/350 I, DocuCentre 550 I/450 I

(Scanner) Specifications" (P.536).

• This feature does not appear for some models. An optional package is necessary. For more

information, contact our Customer Support Center.

• Fields displayed vary depending on the protocol.