Table of Contents
Advertisement
13 Machine Status
On the [Machine Configuration] screen, you can check the following items.
Note
[Software Version] Screen
You can check the software version.
1
Select [Software Version].
13
Note
On the [Machine Configuration] screen, you can check the following items.
Paper Tray
You can check the paper trays set on the machine. On the screen, you can check the
following items.
1
Select [Paper Tray].
Note
386
Configuration Code
Auto Document Feeder
Stamp
Paper Tray
High Capacity Feeder
Side Output Tray
Center Output Tray
• [Output Device] indicates whether or not a finisher (optional) is installed. If B Finisher is
installed, it is displayed as "B Finisher". If C Finisher is installed, it is displayed as "C
Finisher".
• Select [
] to return to the
previous screen or [
move to the next screen.
Controller ROM
IOT ROM
Finisher C ROM
Finisher B ROM
IIT ROM
Status
Filled (Amount of paper remaining)
Paper Size
Paper Type
• Select [
] to return to the
previous screen or [
move to the next screen.
Booklet Maker
Duplex Module
Hard Disk
Page Memory Size
System Memory Size
PostScript
ESC/P
] to
ADF ROM
Fax ROM
Fax G3 Option ROM
SJFI
SSMI
] to
HP-GL/2
PCL
PDF
USB
Fax Main Board
Fax Extension Board
Output Device
Advertisement
Table of Contents
