Table of Contents
Advertisement
Note
Manual Send (transmitting with picking up the telephone or on-hook)
1
Display the [On-hook/Others]
screen by selecting the [On-hook/
Others] tab.
2
Select [On-hook (Manual Send/
Receive)].
3
Select [Manual Send].
4
Select [Alphanumeric] or [Symbol].
5
Use the keyboard shown in the touch screen to enter the following format.
Note
F Code Method
When the machine is an initiating station, you can perform Relay Broadcast Send if the
F Code that has been set for the relay station and the password (if necessary) are
registered on the machine.
When the machine is a relay station, you can perform Relay Broadcast Send if the F
Code that has been set for the initiating station and the password (if necessary) are
registered on the machine.
Important • When performing Relay Broadcast Send with the F Code method, you can use a password if
Note
When using the machine as a relay station, the F Code that is transmitted to the
initiating station is as follows.
Relay Broadcast
Send
Relay Broadcast
Number of digits of the relay station ID:
1: For relay station IDs and address numbers that are 2 digits
2: For relay station IDs and address numbers that are 3 digits
• The above dialing format can be registered in an address number to send using the address
number. For information on how to register address numbers, refer to "Address Book
(Address Number)" (P.347).
• You can specify up to 20 locations for relay recipients.
you set a receive password for the relay station.
• When performing Relay Broadcast Send with machines of this model, we recommend using
the fax signal method.
• When using a machine of a different model as a relay station, confirm the F Code (sub-
address) and password of the target recipient machine.
Print
Relay
directive
station ID
Up to 20 digits
Address
number
Address
Address
Address
Number
Number
Number
Broadcast
4
....
147
Advertisement
Table of Contents
