Table of Contents
Advertisement
17 Appendix
17
558
Item
Setting Item
number
Layout
405
Paper Size
406
Print
408
Processing
Mode
Sets the layout for printing.
Note
• This item can be set when [PDF Bridge] is selected for
[Print Processing Mode].
[0] (Default)
: Auto %
[1]
: Booklet
[2]
: 2 Up
[3]
: 4 Up
[4]
: 100% (size-by-size)
The [Auto %] setting automatically calculates the largest
magnification possible to fit to the output paper size. It
automatically selects A4 or letter size paper based on the size
of the original PDF file.
The [Booklet] settings prints the images side by side, on both
sides of each page, in the correct order to make a booklet.
Some documents may not be printed in a booklet fashion
depending on the structure of their pages. In such case, they
will be printed with the [Auto %] setting.
Note
• When [A4] is selected for [Paper Size], documents will be
printed on A4 size paper.
• When [Paper Size] is set to [Auto], documents will be
printed on A3 or A4 size paper.
The 2 Up setting prints two pages onto one sheet of paper.
When 2 Up is selected, the paper size is fixed at A4.
The 4 Up setting prints four pages onto one sheet of paper.
When 4 Up is selected, the paper size is fixed at A4.
Set the size of the paper to be printed.
[0]
: Auto
[1] (Default)
: A4
The [Auto] setting automatically determines the paper size,
based on the size of a PDF file to be printed and the settings
configured for it.
Sets the print processing mode when using the PDF Direct
Print feature.
[0] (Default)
: PDF Bridge
[1]
: PS
[PDF Bridge] processes PDF files using the PDF Direct Print
feature provided by Fuji Xerox.
[PS] processes PDF files using the PostScript feature provided
by Adobe.
Note
• This item appears only when the optional PostScript 3 kit
is installed.
• The print results may be different between the [PDF
Bridge] and [PS] selections.
• When [PS] is selected, the setting s for [Layout] becomes
invalid.
Value
Advertisement
Table of Contents
