Table of Contents
Advertisement
16 Problem Solving
Error Code
116-771
116-772
116-773
116-774
116-775
116-776
116-777
116-778
116-780
116-790
123-400
124-701
124-702
16
124-703
124-704
124-705
124-706
124-709
498
Category
C P F S M O
O
[Cause]
[Remedy] The printed image may be incomplete. Check the correct
O O [Cause]
[Remedy] Check the attached document.
O
[Cause]
[Remedy] Check the staple position and try again.
O
[Cause]
[Remedy] Power-cycle the machine. If the machine is not improved
O [Cause]
[Remedy] Contact our Customer Support Center. Trays other than
O [Cause]
[Remedy] Contact our Customer Support Center. Trays other than
O [Cause]
[Remedy] Contact our Customer Support Center. Trays other than
O [Cause]
[Remedy] Contact our Customer Support Center. Trays other than
O
[Cause]
[Remedy] Check the punch position, and try again.
O
[Cause]
[Remedy] Check the folding setting, and try to print again.
O
[Cause]
[Remedy] Reduce the number of pages, or cancel the stapling
Cause and Remedy
The data was automatically modified because it included
an invalid parameter.
image, or ask the sender to send the data again. When
using the forwarding feature of iFax, check the data sent
to the e-mail recipient.
There is a problem with the document attached to the
received e-mail.
The staple setting was canceled for printing.
Machine malfunction
by performing the relevant remedy, contact our Customer
Support Center.
The output destination was changed to the center tray
due to the malfunction of the specified side tray.
the defective output tray can be used.
The output destination was changed to the center tray
due to the malfunction of the specified finisher tray.
the defective output tray can be used.
The output destination was changed to the center tray
due to the malfunction of the specified booklet tray.
the defective output tray can be used.
The output destination was changed to the center tray
due to the malfunction of the specified output tray.
the defective output tray can be used.
The punch setting was canceled.
The folding setting was canceled.
The document exceeded the maximum number of pages
that can be stapled.
setting, then try to print again.
Advertisement
Table of Contents
