Table of Contents
Advertisement
13 Machine Status
Reset Job Counters
You can reset the counts of scanned or printed pages cumulated per service.
This appears when the user ID for entering the System Administration mode is set, and
when you have selected [User Mode] in the System Administration mode.
1
Press the <Log In/Out> button.
2
Enter the user ID with the numeric
keypad, and select [Confirm].
Note
3
Select [User Mode].
13
4
Press the <Machine Status>
button.
5
Select the [Billing Meter/Print
Report] tab.
6
Select [Reset Job Counters].
Reset
You can reset counts cumulated per service. To reset counts, select [Yes] on the
confirmation screen.
Important • Once reset, the previous counts cannot be restored.
Print
You can print the current count of each service as [Job Counter Report].
392
• The default user ID is "11111".
When the Authentication
features is in use, a password
may be required. The default
password is "x-admin".
Advertisement
Table of Contents
