Table of Contents
Advertisement
2 Up On Receipt
Set to have two received pages printed combined on one sheet. This is convenient for
saving paper.
For example, when two A5 pages are received, they are printed on a single A4 sheet.
However, if paper of the same paper size as the received document is declared in
[Receiving Paper Size], it is printed on that size. Depending on the sizes of the received
documents, multiple-up receiving may not be possible.
2 Sided Printing
Set whether to print received fax documents (including iFax received documents) as 2-
sided. This is convenient for saving paper.
Note
Edge Erase - Top & Bottom Edges
Set the amount of border erased from the original in the top and bottom directions. Set
a value from 0 to 20 mm, in 1 mm increments.
Edge Erase - Left & Right Edges
Set the amount of border erased from the original in the left and right directions. Set a
value from 0 to 20 mm, in 1 mm increments.
Reduce 8.5 x 11"
Original to A4
When [Reduce/Enlarge] in the [Scan Options] screen is set to [Auto %], you can set
whether to reduce 8.5 x 11"
Pseudo-Photo Gradation Mode
You can set the toning method for photo originals. To get closer to photo image quality,
select the handling of intermediate tones (gray). You can select from [Error Diffusion]
and [Dither].
Box Selector - Line Setup
Select whether to use the box selector by phone number feature.
Using the box selector by phone number feature, a received document is stored to a
specified mailbox according to the sender's phone number or local terminal's direct
dialing.
Memory Full Procedure
When the space of the hard disk runs out during scanning originals, a screen appears
asking how the partly stored data should be handled.
Once a certain time has elapsed with the confirmation screen displayed, the
subsequent processing is determined by these settings.
You can set the time until the memory full procedure is carried out. For more information, refer to "Auto
Job Release" (P.266).
Cancel Job
The stored data is discarded.
Run Job
The read-in data is treated as valid, and the part of the original read in is treated as a
complete stored file.
• This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
• Even if you select [On], depending on the data, 2-sided printing may not always be possible.
size to A4
, while scanning the original.
Fax Mode Settings
11
317
Advertisement
Table of Contents
