Paper Tray Settings - Fuji Xerox ApeosPort-II C7500 Administrator's Manual

6 System Settings
Note
All Services / All Services - Additional Features
Set the layout of buttons that appear on the [All Services] screen when pressing the <All
Services> button on the control panel.
The layout of buttons in this screen is corresponding to the layout of those on the [All
Services] screen.
For more information on how to set the layout of buttons that appear on the [All Services] screen, refer
to "2 Product Overview" > "Control Panel" > "Customizing the Control Panel" in the User Guide.
Note
Job Type on Job Status Screen
Select the job types to be shown on the [Completed Jobs] screen of the [Job Status] screen
that is displayed when the <Job Status> button on the control panel is pressed.
Select from [All Jobs], [All Non-Printing Jobs], [Mailbox Transfer Jobs], and [All Printing Jobs].
Default Language
You can select the language displayed on the machine.
There are two ways of selecting the language: set in the System Administration mode, and
set by ordinary users.
Setting in the System Administration mode
The language set here is the standard language that is retained even when the machine is
6
powered off and on.
Setting by ordinary users
The language setting in [Language] in the [All Services] screen is lost when the machine is
powered off.
Screen Contrast
You can adjust the screen contrast within the range from -16 to +16.

Paper Tray Settings

Set the items relating to the paper and trays, including the types and precedence of
paper loaded in the trays.
Custom Paper Name
Assign custom names to User 1 to User 5. The following paper types are available as the
custom paper: plain paper, bond paper, and recycled paper. You can use letters, numerals,
and symbols of up to 24 characters for each name.
For example, you can use a name showing its usage, such as "Color" for colored paper, and
"Covers" for bond paper.
For information about how to enter characters, refer to "2 Product Overview" > "Entering Text" in the
User Guide.
126
• The operation settings can be registered in the [Stored Programming] screen. For
information on Stored Programming, refer to "6 Stored Programming" > "Registering/
Deleting/Renaming Stored Programming" in the User Guide.
• The default setting of [Custom Button 1] is [Copy].
• It is not possible to assign the same feature to more than one button.