Using Your Fax Machine As A Phone; Dialing A Telephone Number; On-Hook Dialing; Redial - Muratec MFX-1200 Operating Instructions Manual

Using your fax machine as a phone

Your fax machine can also be used as a phone, if you have an optional handset
installed. The following is a brief look at the machine s telephone features.

Dialing a telephone number

1
Pick up the optional handset. You will hear a dial tone.
2
Dial the number by the using numeric keypad.
or
Press the one-touch key. (See One-touch phone dialing, on page 3.4.)
or
Press / once, then press the three digit speed-dial num-
SPEED DIAL TEL INDEX
ber. (See Phoning via speed-dial, on page 3.7.)
or
Press / twice, then search the name you want to call using
TEL INDEX TEL INDEX
the cursor key. (See Easy dial directory dialing, page 3.9.)
3
When the other person answers, begin speaking.

On-hook dialing

Because your machine has a monitor speaker, you can dial without picking up the
optional handset. For hands-free dialing:
1
Press / . You ll hear a dial tone (unless you have set your speaker
MONITOR CALL
volume to Off; see page 1.8), and the
** Tel Mode **
_
2
Dial the number you want. Use either the numeric keypad, a one-touch key, a
speed-dial number or telephone index to dial.
Important: Your machine s monitor speaker is not a speaker phone. If a person
answers the call, pick up the handset to speak.
Note: If the call fails, press
MONITOR
shows:
LCD
/ to hang up.
CALL

Redial

1
Lift the optional handset to get a dial tone.
2
Press / . The
REDIAL PAUSE LCD
View Redial History
0:1234567890
3
Your machine can remember the latest 10 dial numbers. Press
the dial number you want to redial appears.
4
Press .
START
When the other person answers, use the optional handset to speak to that
person.

Call request

You can send or receive a fax message and have a regular phone conversation on the
same call.
For more information on how to use this function, see page 3.25.

Changing the dialing type

If, with your machine set for pulse dialing, you must enter tones (
call, press once (the ! symbol will be shown on the
DIALING OPTIONS
machine now will tone dial all subsequent numbers.
Note: Using this key enables tone transmission from the numeric keypad after the
call is connected. When you hang up the call, your machine will return to
pulse dialing for the next call.

Dialing in the event of a power failure

Your fax machine can only receive telephone calls even in the event of a power fail-
ure, if an optional handset is attached. But it cannot send or receive a fax document.
will show:
DTMF
LCD
Basic operation
or until
) during a
). Your
2.19