Checklist of 2-Post Rackmounting and
Setup Tasks
TABLE 2-1
Step
1
2
3
4
5
6
7
8
Note – The steps are different if you are installing the server into a populated rack.
See
"Install the Server Into a Populated Rack" on page 29
22
Sun Fire V490 Server Setup and Rackmounting Guide • August 2004
Overview of 2-Post Rackmounting and Setup Tasks
Task
Unpack the rackmounting kit and
verify the contents.
Attach the brackets to the server.
Locate the mounting holes.
Install the mounting screws.
Install the server into the rack.
Install the cable management arm.
Connect the power cords.
Connect a twisted-pair Ethernet
(TPE) cable
Refer to:
"Inventory for 2-Post Rackmounting" on
page 23
"Attach the Mounting Brackets to the
Chassis" on page 24
"Locate the Mounting Holes" on page 25
"Install the Mounting Screws" on page 26
"Install the Server Into the Rack" on page 27
"Install the Cable Management Arm" on
page 33
"Connect the Power Cords" on page 41
"Connect a Twisted-Pair Ethernet Cable" on
page 44
for instructions.