Setting Auto Cleaning - MIMAKI Tx500-1800B Operation Manual

Setting Auto Cleaning

You can set the machine so that it counts the number of printed files or the length or time after printing has
been completed, and performs cleaning automatically if required.
You can select the auto cleaning setting from three types below:
• PAGE : Set the cleaning intervals by the number of printed files.
• LENGTH : Set the cleaning intervals by the printed length.
• TIME : Set the cleaning intervals by the printed time.
The machine can perform a stable printing operation with its heads always kept clean.
1
Press the
2
Press the
3
Press
press the
4
Press
• There are "PAGE", "LENGTH" and "TIME" for auto cleaning.
PAGE : When the set number of prints has been completed, the machine performs head cleaning automatically.
LENGTH : When the set length has passed, the machine performs head cleaning automatically.
TIME : When the set time has passed, the machine performs head cleaning automatically.
• If you do not set auto cleaning, first select "OFF" and then proceed to the Step 10.
5
Press the
6
Press
• Depending on the auto cleaning type selected in the Step 5, the
setting value differs.
For PAGE
For LENGTH : 0.1 to 100.0m (in 0.1m increment)
For TIME
7
Press the
8
Press
Set Value : NORMAL/ SOFT/HARD
9
Press the
10
Press the
• Depending on the state of the heads, etc., the image quality deterioration may not be improved even
with this function performed.In this case, contact our service office or the distributor in your region.
3-8
key in LOCAL.
key.
to select [AUTO CLEANING] and
key.
to select the type of auto cleaning.
key.
to set the cleaning interval.
: 1 to 1000 page
: 10 to 120min (in 10min increment)
key.
to set the cleaning type.
key.
key several times to end the setting.
F UNC T I ON
S E TUP [ EN T ]
S E TUP
F E ED COMP . [ EN T ]
AU TO C L E AN I NG
: OF F
AU TO C L E AN I NG
: L ENGTH
I N T ERVA L
= 1 0 . 0 m
T Y PE
: SOF T
T Y PE
: NORMA L