7
By pressing the
• The screen to correct the next pattern is displayed. Repeat the
procedures from the Step 5 to correct all patterns.
• After correcting all patterns, perform the procedures in the Step 7.
8
Press the
Performing to correct the dot position without
You can select "DROP.POScorrect" by using the
key.
Press the
key in Local.
2-36
Correct the ink drop position for bidirectional printing
key, register the correction value.
key several times to end the setting.
Press
to
select [SETUP], and
press the
key.
P A T T ERN 2
=
key in the Local without pressing the
Press
to select [DROP.POScorrect],
and press the
key twice.
• The screen in the Step 3 is displayed. Perform
the procedures from the Step 4.
0 . 0
key