Table of Contents
Advertisement
When the Machine Is Not Used for a Long Time (CUSTODY WASH)
When the machine is not going to be used for a week or more, use the cleaning function for custody to clean
the head nozzles and ink discharge passage.After this, keep the machine in custody.
Check the items on
the right beforehand.
1
Press the
2
Press
3
Press the
• The carriage moves onto the belt.
4
Clean the wiper and the bracket.
(1) Open the right maintenance cover then pull out it by holding projections at both ends of the wiper.
(2) Clean the wiper and bracket with a clean stick dipped in cleaning solution for maintenance
(ML003-Z-K1). Wipe off so that cleaning solution for maintenance will not remain.
(3) Insert it in the original position by holding the projections at both ends of the wiper.
4-12
Is [INK END] displayed?
• The ink is absorbed when the nozzles are washed.
At this time, if the state of "INK END" is detected, the nozzle washing operation cannot start.
• Replace the ink bottle with another from which the state of "INK END" is not detected.
key in LOCAL.
MAINT.
to select [CUSTODY WASH].
key.
• Until wiper/ bracket cleaning is competed, [COMPLETED (NEXT): ENT] is displayed on the
screen. After the work up to the step 4 is completed, press the
key before cleaning is completed, the machine moves to the next washing procedure.
CARR I AGE OU T
[ EN T ]
CUS TODY WA SH
[ EN T ]
WI PER C L EAN I NG
COMP L E T ED ( NEX T ) [ EN T ]
key. If you press the
Projection
Advertisement
Table of Contents
