Operation Touch Panel - MIMAKI Tx500-1800B Operation Manual

Operation Touch Panel

MENU BELT
MANUAL
START BELT
SPEED %
10
AUTOMATIC
FEED
SETUP
PRESSURE ROLLER
LOWER
SERVICE
AIR VALVE
ALARMS
MOTOR RUNNING
ABOUT
CENTERING UNIT
OFF
7
Function
MANUAL
(1)
AUTOMATIC
(2)
SETUP
(3)
SERVICE
(4)
ALARMS
(5)
ABOUT
(6)
HOME BUTTON
(7)
BELT
(8)
BELT HEATER
(9)
AIR BLADE
(10)
(11) PRESSURE ROLLER
WASHING UNIT
(12)
TAKEUP UNIT
(13)
MEDIA DETECT
(14)
CENTERING UNIT
(15)
STATE
(16)
BELT HEATER AIR BLADE
OFF OFF
POWER %
MOTOR RUNNING
100
ON
WASHING UNIT TAKEUP UNIT
OFF CLOCKWISE
WATER VALVE
TAKEUP MOTOR
AIR VALVE
DISCHARGE
BRUSHER MOTOR
MEDIA
STATE
RESET
ALARM
Displaying the "MANUAL" screen.
In the "MANUAL" screen, the belt is operable with no operation of the printer part.
Displaying the "AUTOMATIC" screen.
In the "AUTOMATIC" screen, the belt is operable in conjunction with the printer part.
Displaying the "SETUP" screen.
The language setting of the touch-panel and the setting of each function can be performed.
Displaying the "SERVICE" screen.
The screen is used when applying the anti-wrinkling agent or washing the belt.
Displaying the content of alarm of the media carrying unit.
Cancel the alarm according to the contents of this document.
The firmware version of the media feeding part can be confirmed.
Returning to the "AUTOMATIC" screen by pressing the home button.
Making the media carrying belt operate.
The belt moves by pressing [START BELT]. The belt stops by pressing [STOP BELT].
The operating speed and operating direction of belt can be set.
Making the belt heater operate.
The belt heater is actuated by pressing [ON]. The belt heater stops by pressing [OFF].
The output of belt heater can be set.
Making the air blade operate.
The air blade is actuated by pressing [OFF]. The air blade stops by pressing [ON].
Operating the pressure roller up/down.
The pressure roller goes down by pressing [LOWER]. The pressure roller goes up by pressing
[RAISE].
Making the washing unit operate.
The washing unit is actuated by pressing [OFF]. The washing unit stops by pressing [ON].
Setting the rotating direction of the take-up motor.
The media shaft automatically rotates up to the position where the media shaft is
removable when pressing [DISCHARGE MEDIA].
Making the media detecting function enable/disable.
The media end sensor checks the media end by pressing [OFF]. The media end
sensor does not function by pressing [ON].
Making the centering function enable/disable.
The feeding unit adjusts the media position at the media feeding by pressing [OFF].
Cancelling the media width detecting of the printer part by pressing [RESET].
When the alarm is in red, an error is occurring in the media carrying unit. Check the
content of alarm on the alarm screen.
Names of Parts and Functions
MENU TAKEUP UNIT
MANUAL
CLOCKWISE
MOTOR
AUTOMATIC
DISCHARGE
MEDIA
SETUP
PRESSURE ROLLER
LOWER
SERVICE
AIR VALVE
ALARMS
MOTOR RUNNING
ABOUT
CENTERING UNIT
OFF
7
BELT HEATER AIR BLADE
OFF OFF
POWER %
MOTOR RUNNING
100
ON
WASHING UNIT MEDIA DETECT
OFF OFF
WATER VALVE
AIR VALVE
BRUSHER MOTOR
STATE
RESET
ALARM
1-7
1
3
4
5
6