Table of Contents
Advertisement
5
Press the
• The carriage moves onto the belt.
• Until wiper cleaning is competed, [COMPLETED (NEXT): ENT] is displayed on the screen. After
the work up to the step 6 is completed, press the
before cleaning is completed, the machine moves to the next washing procedure.
6
Clean the cap rubber and cap rubber cover.
• Wipe off the ink sticking to the cap rubber and cap rubber
cover with a clean stick dipped in cleaning solution for
maintenance. Wipe off so that cleaning solution for
maintenance will not remain.
• At this time, the discharge passage is cleaned automatically.
7
Press the
• Until washing liquid is filled, [COMPLETED (NEXT): ENT] is displayed on the screen. After the
work up to the Step 8 is completed and you close the front cover, press the
press the
8
Fill up the cap with cleaning solution for
maintenance, using a dropper.
• Fill the cap with the cleaning solution just before the
solution overflows from the cap.
9
Close the right maintenance cover and press the
key.
10
Press
solution to be left as it is.
• Set Value:1 to 99 min (by the unit of 1 min)
key.
key.
key before washing liquid is filled, the carriage returns to the original position.
to set the time for the cleaning
Maintaining the Capping Station
CA P C L E AN I NG
COMP L E T ED ( NEX T ) [ EN T ]
key. If you press the
Cap rubber
Cap rubber
cover
F i l l
t h e
l i q u i d .
COMP L E T ED ( NEX T ) [ EN T ]
L E AV I NG T I ME
=
L E AV I NG T I ME
=
key
1
1
key. If you
1
4
1 m i n
2 m i n
4-13
Advertisement
Table of Contents
