Setting Of Feed Speed; Setting Auto Cleaning - MIMAKI TS55-1800 Operation Manual

Chapter 3 Setup
6
press the
end the setting.
Suction fan always on
If you leave the suction fan off, the media may be
distorted or lifted, causing media jam during the next cap-
off operation.
By leaving the suction fan on after printing or jog
operation, it is possible to prevent the media from being
distorted or lifted.
1
In local mode, press
CLEANING) and press the
• The "MAINTENANCE" screen is displayed.
2
Press
Running".
3
Press the
• Setting value: ON / OFF
• ON : The suction fan operates immediately after
setting.
Even after the cap OFF operation (printing,
station maintenance, jog operation, etc.) is
completed, the suction fan remains in
operation.
The strength for sucking the media follows
the user setting (MENU> SET UP>
VACUUM FAN).
• OFF : Stops the suction fan operation.
4
Press the
end the setting.

Setting of Feed Speed

Changes the media feeding speed in printing.
1
Press
LOCAL.
2
Press
and press the
• SETUP MENU will be displayed.
3
Press
4
Press
and press the
5
Press
press the
• Set value : HOST / 10 to 200%
6
Press the
end the setting.
• Some speed is not changed according to
a setting condition.
• The media feed speed during printing is
decided by this setting and the set value
in [Setting of Feed Quality].
3-8
key several times to
(TEST PRINT /
key.
to select "Vacuum Cont.
key to select ON/OFF.
key several times to
key in
(MENU)
to select SETUP 1 to 4,
key.
(>>) twice.
to select "FEED SPEED",
key.
to select a set value, and
key.
key several times to

Setting Auto Cleaning

You can set the machine so that it counts the number of
printed files or the length or time after printing has been
completed, and performs cleaning automatically if required.
You can select the auto cleaning setting from three types
below:
• PAGE : Set the cleaning intervals by the number of
printed files.
• LENGTH : Set the cleaning intervals by the printed
length.
• TIME : Set the cleaning intervals by the printed
time.
Besides, automatic nozzle check after auto cleaning can
be set. (Cleaning Check function)
The machine can perform a stable printing operation with
its heads always kept clean.
1
Press
(MENU)
2
Press to select SETUP 1 to 4,
and press the
• SETUP MENU will be displayed.
3
Press (>>) twice.
4
Press to select "AUTO
CLEANING", and press the
5
Press the
to select the type of auto cleaning.
• There are "PAGE", "LENGTH" and "TIME" for
auto cleaning.
FILE: When the set number of prints has
been completed, the machine
performs head cleaning automatically.
LENGTH: When the set length has passed, the
machine performs head cleaning
automatically.
TIME: When the set time has passed, the
machine performs head cleaning
automatically.
• If you do not set auto cleaning, first select "OFF"
and then proceed to the Step 10.
6
Press , and press
select the cleaning interval.
• Depending on the auto cleaning type selected in
the Step 5, the setting value differs.
For FILE: 1 to 1000 file
For LENGTH: 0.1 to 100.0m (in 0.1m increment)
For TIME: 10 to 120min (in 10min increment)
7
Press the
to select the cleaning type.
• Set Value : NORMAL/ SOFT/HARD
8
Press the
to select "Cleaning Check".
9
Press the
to select set value.
• Set Value : ON/ OFF
10
Press the
in LOCAL.
key.
key.
key, and press
to
key, and press
key, and press
key, and press
key.