Setting Auto Cleaning; Setting Interval Wiping - MIMAKI TS300P-1800 Operation Manual

Setting Auto Cleaning

You can set the machine so that it counts the number of
printed files or the length or time after printing has been
completed, and performs cleaning automatically if required.
You can select the auto cleaning setting from three types
below:
• PAGE : Set the cleaning intervals by the number of
printed files.
• LENGTH : Set the cleaning intervals by the printed
length.
• TIME : Set the cleaning intervals by the printed
time.
Besides, automatic nozzle check after auto cleaning can
be set. (Cleaning Check function)
The machine can perform a stable printing operation with
its heads always kept clean.
Press
(MENU)
1
Press to select SETUP 1 to 4,
2
and press the
• SETUP MENU will be displayed.
Press (>>) twice.
3
Press to select "AUTO
4
CLEANING", and press the
Press the
5
to select the type of auto cleaning.
• There are "PAGE", "LENGTH" and "TIME" for
auto cleaning.
When the set number of prints has been
FILE:
completed, the machine performs
head cleaning automatically.
LENGTH:When the set length has passed, the
machine
automatically.
When the set time has passed, the
TIME:
machine
automatically.
• If you do not set auto cleaning, first select "OFF"
and then proceed to the Step 6.
Press , and press
6
select the cleaning interval.
• Depending on the auto cleaning type selected in
the Step 3, the setting value differs.
1 to 1000 file
For FILE:
For LENGTH:0.1 to 100.0m (in 0.1m increment)
10 to 120min (in 10min increment)
For TIME:
Press the
7
to select the cleaning type.
• Set Value : NORMAL/ SOFT/HARD
Press the
8
to select "Cleaning Check".
Press the
9
to select set value.
• Set Value : ON/ OFF
in LOCAL.
key.
key.
key, and press
performs head cleaning
performs head cleaning
to
key, and press
key, and press
key, and press
Press the
10
Press the
11
end the setting.
• Depending on the state of the heads, etc., the image
quality deterioration may not be improved even with
this function performed.In this case, contact our
service office or the distributor in your region.

Setting Interval wiping

When the set time has passed, nozzle face of the head is
cleaned automatically to remove ink droplets on the
nozzle face.
In case that deflection, nozzle missing, or symptom which
ink droplets fall down occurred, set the interval between
each operation shorter.
Press
(MENU)
1
Press to select SETUP 1 to 4,
2
and press the
• SETUP MENU will be displayed.
Press (>>) twice.
3
Press to select "INTERVAL
4
WIPING", and press the
Press to set intervals.
5
• Set Value : 3 to 255 Minutes, OFF
• When [OFF] is set, periodical wiping is not
executed.
Press the
6
Press the
7
end the setting.
Chapter 3 Setup
key .
key several times to
in LOCAL.
key.
key.
key.
key several times to
3-11
1
2
3
4
5
6