Table of Contents
Advertisement
5
Make slits in the top surface of the bottle as the
figure, and push the aluminum sheet downward.
• Use a cutter etc. to make slits in the top surface.
How to make slits
• When you make slits in the aluminum sheet, divide it
into eight parts as shown in the figure, or, cut off the
aluminum sheet along the inner side of the bottle.
Divide into eight
parts.
6
Set the ink bottle on the bottle holder, and attach
the ink cover.
• Make the nozzle (stick shape) for absorbing ink and the
float sensor for detecting remaining amount of ink so that
they may be in the ink bottle.
• When ink plate gets dirty with ink etc., wipe it off with a
waste cloth.
7
Insert the IC chip.
• Insert the IC chip with the surface with metal upward. If you
insert the wrong side by accident, it causes faulty or
damage of the IC chip.
• Do not touch the metal part of the IC chip. It may break the
IC chip by static, or may cause read error by stain or flaw.
• For the setting orders of the ink bottles, refer to P.6-4.
1-18
Cut off the inner
side of the bottle
(dotted-line part).
Catches
Ink plate
Advertisement
Table of Contents
