Table of Contents
Advertisement
Check the print condition for which nozzle recovery cannot be performed
Depending on the registered nozzle, there is a mode on which recovery is not reflected. Check the print
condition for which recovery cannot be performed.
• When there are many registered nozzles, it takes much time to display the checked result.
1
Select [NOZZLE RECOVERY] of the maintenance menu.
(1) Press the
(2) Press
(3) Press
(4) Press the
2
Press
3
Press the
• The mode for which nozzle recovery is invalid is displayed.
• If there is no mode for which nozzle recovery is invalid, "NONE" is
displayed.
4
Press
key in LOCAL.
to select [MAINTENANCE] and press the
to select [NOZZLE RECOVERY].
key.
to select [CHECK].
key.
the key several times to end the setting.
When Nozzle Clogging Cannot Be Solved
NOZ Z L E RECOVERY
: CHECK
UNRECOV ERA B L E COND .
:
6 0 0 x 9 0 0
key.
6 p / H
Scanning speed
Number of passes
Resolution
4-21
1
1
1
4
Advertisement
Table of Contents
