For Ink; Ink Type; Caution In Handling Of Ink Bottles - MIMAKI Tx500-1800B Operation Manual

Hide thumbs Also See for Tx500-1800B:
Table of Contents

Advertisement

For ink

About ink expiration date
The ink bottle has its expiration date.
You can use the bottle in two months after the expiration date indicated on it, however, you cannot use it when
three months have passed from the expiration date.
When it becomes unusable, the ink bottle lamp blinks fast in red to inform you of it. At this time, replace it with
new one.
Ex.) When the expiration date is April 2014
May : Usable
June : Usable (Ink bottle lamp blinks in red.)
July : Unusable (Ink bottle lamp blinks fast in red.)
About ink end and ink near end
When it becomes Ink near end (remaining amount of ink is less), the ink bottle lamp blinks in red to inform you
of it. It is recommended to replace it with new one as soon as possible.
When it becomes Ink end (remaining amount of ink is none), the ink bottle lamp lights in red to inform you of it.
Replace the ink bottle.

Ink type

For this machine, the following three types of ink can be used:
Acidic dye ink
Reaction dye ink
Sublimation dye ink
• Whichever ink you use, be sure to perform pre-treatment and after-treatment that our company
recommends to the fabric to be printed.

Caution in handling of ink bottles

• If you get ink in your eyes, immediately wash your eyes with a lot of clean running water for at least 15
minutes. In doing so, also wash the eyes to rinse ink away completely. Then, consult a doctor as soon
as possible.
• Use genuine ink bottles for this machine. This machine functions by recognizing the genuine ink
bottles. In case of troubles caused by modified ink bottles or the like, it shall be out of the warranty
even within the warranty period.
• If the ink bottle is moved from a cold place to a warm place, leave it in the room temperature for three
hours or more before using it.
• Make sure to store ink bottles in a cool and dark place.
• Store ink bottles and waste ink tank in a place that is out of the reach of children.
• Request an industrial waste processor for processing of empty ink bottles.
• Be sure to thoroughly consume the ink in the ink bottle, once it is opened, within three months. If an
extended period of time has passed away after opening the ink bottle, printing quality would be poor.
• Do not shake ink bottles violently. This may result in ink leakage from the ink bottles.
• Do not touch or stain the contacts of the IC chip. This may cause damages on printed circuit boards.
1-22
Suitable for fabric of animal type such as wool, silk, etc. and nylon.
Suitable for fabric of wool, silk, etc. as well as cotton, rayon, etc.
Suitable for fabric of polyester, acrylic, etc.

Advertisement

Table of Contents
loading

Table of Contents