Setting Of Fan Mode; Setting Of Auto Cleaning - MIMAKI UJF-3042 MkII Series Operation Manual

Chapter 3 Setup
Press the
1
mode.
Press
2
press the
• The setting menu is displayed.
Press the
3
Press
4
CHANGE" , and press the
Press
5
press the
• Set value : ON/ OFF
Press the
6
end the setting.
3-12
(MENU) key in the local
to select "Setting", then
key
(>>) .
to select "WORK
key.
to select a set value, and
key.
key several times to

Setting of FAN MODE

You can set whether the vacuum function to fix the media
set on the table is performed automatically or you perform
it manually.
The factory default is "AUTOMATIC".
(Only for UJF-3042MkII EX/UJF-3042MkII EX e, UJF-
6042MkII/UJF-6042MkII e or when using an absorption
table.)
Press the
1
mode.
Press to select "Setting", then
2
press the
• The setting menu is displayed.
Press the
3
Press to select "FAN MODE" ,
4
and press the
Press to select a set value, and
5
press the
• Set value : AUTOMATIC/ MANUAL
Press the
6
end the setting.
• When AUTOMATIC is selected, the fan
automatically starts to operate at print start.

Setting of AUTO CLEANING

Set whether auto-head cleaning is executed or not at the
following intervals before drawing.
Press the
1
mode.
Press to select "Setting", then
2
press the
• The setting menu is displayed.
Press the
3
Press to select "AUTO
4
CLEANING" , and press the
Press to select a set value, and
5
press the
• Set value : ON/ OFF
Press the
6
end the setting.
(MENU) key in the local
key
(>>) .
key.
key.
key several times to
(MENU) key in the local
key
(>>) .
key.
key.
key several times to