Operation Panel - MIMAKI Tx300P-1800 Operation Manual

Chapter 1 Before Use

Operation Panel

Use the operation panel to make settings for printing or operate this machine.
key
Changes over the functions of the
function keys ([FUNC1] to [FUNC3]
).
/ /
Press this to set various functions or
to do test printing. The function
keys' functions are changed each
JOG key
Use these keys to shift the carriage or
the media in [LOCAL]. Also use them to
select an item of printing conditions.
key
Cancels the last input value or returns
the setting menu to the immediate
higher level of the hierarchy. Also, press
this to turn the power on or off. (Give it a
long press to turn the power off.)
key
Registers the last input value as the
setting value or goes to the immediate
lower level of the hierarchy.
• The power switch under the operation panel lights in blue when the power is turned on, and off when the power switch
is turned off. The ink clogging prevention function is periodically operated even when the power switch is OFF if the
main power switch(
*1 : Ink Status
Status of the ink cartridge (remaining ink/error, etc.) is displayed using icons. Each icon is described below.
Icon
The remaining amount of ink is displayed in 9 stages. The remaining amount decreases moving to the right.
ink full
Displayed at ink end (only when the 4-color ink set is used) and ink near end.
Indicates that the cartridge cannot be used due to ink end or ink error (remaining ink 0, cartridge not attached, etc.).
Indicates that ink has expired or that one month has passed after the expiration date. Please use quickly. Ink can no
longer be used if two months have passed after the expiration date.
1-6
Local <Setup 1>
LOCAL
PRE
30° /40°30° /35°40° /50°
MENU MENU
key
Status indicator lamp
Indicates the machine's status (printing, error occurred, etc).
Condition of Lamp
OFF
Lit steady Light blue
Flashing Light blue
Lit steady blue
Flashing red
Lit steady red
Lit steady yellow
P.1-3)
keeps being ON(Auto maintenance function).
Approximately Approximately Approximately
1/8 consumed 1/4 consumed. 3/8 consumed.
12:00
heigth: 4.0mm
width:1340mm width:1340mm
PRINT POST
TEST PRINT TEST PRINT
REMOTE REMOTE
CLEANING CLEANING
Condition of machine
Machine is in LOCAL mode, no print data has been
received, and no errors have occurred.
Switched to REMOTE mode.
Currently printing.
In test printing: printing a pattern stored inside the
machine.
Print data still remains in the machine.
Error has occurred.
Error (SYSTEM HALT) has occurred.
Firmware is being updated.
Contents
Approximately Approximately
1/2 consumed. 5/8 consumed.
Display
Displays the following items:
• Printer status
• Set media width
*1
• Ink status
• Functions assigned to [FUNC1]
*2
to [FUNC3]
Approximately Approximately
near end
3/4 consumed. 7/8 consumed.