Sensor (2 X 500-Sheet Tray Paper Width) Removal - Lexmark MS911 Service Manual

Sensor (2 x 500-sheet tray paper width) removal

1
Remove the rear cover. See
2
Remove the screw.
3
Disconnect the cable from the sensor, and then remove the sensor holder.
#
1 Sensor (2 x 500-sheet tray 3 near empty)
2 Sensor (2 x 500-sheet tray 4 near empty)
"2 x 500-sheet tray rear cover removal" on page
#
1 Sensor (2 x 500-sheet tray 3 paper width)
2 Sensor (2 x 500-sheet tray 4 paper width)
Repair information
372
Part
370.
Part
4021