NumPad Job Assist
This setting determines if you can configure and initiate a job using the hard buttons of the control panel.
1
Enter the Configuration Menu, and then select NumPad Job Assist.
2
Select a setting.
3
Apply the changes.
Paper Prompts
This setting determines the input source to which the printer directs a paper change prompt.
Note: The value of
"Action for Prompts" on page 191
1
Enter the Configuration Menu, and then select Paper Prompts.
2
Select a setting.
3
Apply the changes.
Envelope Prompts
This setting determines the input source to which the printer directs an envelope change prompt.
Note: The value of
"Action for Prompts" on page 191
1
Enter the Configuration Menu, and then select Envelope Prompts.
2
Select a setting.
3
Apply the changes.
Action for Prompts
This gives you the option to allow the printer to resolve change prompt situations without requiring any user assistance.
1
Enter the Configuration Menu, and then select Action for Prompts.
2
Select a setting.
3
Apply the changes.
Jobs on Disk
This setting allows you to delete buffered jobs from the printer hard disk.
1
Enter the Configuration Menu, and then select Jobs on Disk.
2
Select a setting.
3
Apply the changes.
may override the value of this setting.
may override the value of this setting.
Service menus
191
4021