Lexmark MS911 Service Manual page 61

Action
Step 7
Replace the sensor (MPF empty).
Does the problem remain?
Step 8
a
Make sure that the MPF lift plate, including the cam and gears, are
properly installed.
b
Check the MPF lift plate, including the cam and gears, for damage, and
replace if necessary.
Does the problem remain?
Step 9
Observe the MPF lift plate solenoid.
Is it working properly?
Step 10
a
Reseat the MPF lift plate solenoid cable.
b
Check the MPF lift plate solenoid cable for damage, and replace if
necessary.
Does the problem remain?
Step 11
Check the MPF lift plate solenoid, including the actuator for wear or
damage, and replace if necessary. See
on page 251.
Does the problem remain?
Step 12
Observe the MPF lift plate clutch.
Is it working properly?
Step 13
a
Reseat the MPF lift plate clutch cable.
b
Check the MPF lift plate clutch cable for damage, and replace if
necessary.
Does the problem remain?
Step 14
Check the MPF lift plate clutch for damage, and replace if necessary.
Does the problem remain?
"MPF lift plate solenoid removal"
Diagnostic information
61
Yes No
Go to step 8. The problem is solved.
Go to step 9. The problem is solved.
Go to step 11. Go to step 10.
Go to step 11. The problem is solved.
Go to step 12. The problem is solved.
Go to step 14. Go to step 13.
Go to step 14. The problem is solved.
Go to step 15. The problem is solved.
4021