X 500-Sheet Tray Tray Set Actuator Removal - Lexmark MS911 Service Manual

#
1 2 x 500-sheet tray empty sensor actuator
2 Sensor (2 x 500-sheet tray empty)
3 Sensor (2 x 500-sheet tray lift plate level)
4 Sensor (2 x 500-sheet tray feed)
Note: Remove the screw, remove the sensor bracket, and then remove the sensor.
2 x 500‑sheet tray tray set actuator removal
1
Remove the rear right cover. See
2
Remove the jam access door. See
3
Remove the bottom right cover. See
4
Remove the tray 3 or tray 4 transport assembly. See
page 377 or "2 x 500-sheet tray 4 transport assembly removal" on page
5
Release the spring (A).
Part
"2 x 500-sheet tray rear right cover removal" on page
"2 x 500-sheet tray jam access door removal" on page
"2 x 500-sheet tray bottom right cover removal" on page
"2 x 500-sheet tray 3 transport assembly removal" on
Repair information
380
376.
375.
377.
378.
4021