Excess Options Service Check - Lexmark MS911 Service Manual

Action
Step 3
a
If applicable, remove all internal options.
b
Reset the printer, and then resend the print job.
Does the problem remain?
Step 4
Check the controller board pins for damage, and replace if necessary. See
"Controller board removal" on page
Does the problem remain?

Excess options service check

Action
Step 1
Reset the printer, and then resend the print job.
Does the problem remain?
Step 2
If applicable, make sure that the internal option is supported.
Does the problem remain?
Step 3
a
If applicable, remove all internal options.
b
Reset the printer, and then resend the print job.
Does the problem remain?
Step 4
Check if the number of internal options installed is allowed, and remove
the excess option.
Does the problem remain?
Step 5
Check if the number of input options installed is allowed, and remove the
excess option.
Does the problem remain?
Step 6
Check the controller board pins for damage, and replace if necessary. See
"Controller board removal" on page
Does the problem remain?
298.
298.
Diagnostic information
122
Yes No
Go to step 4. The problem is solved.
Contact the next level The problem is solved.
of support.
Yes No
Go to step 2. The problem is solved.
Go to step 3. The problem is solved.
Go to step 6. Go to step 4.
Go to step 5. The problem is solved.
Go to step 6. The problem is solved.
Contact the next level The problem is solved.
of support.
4021