Lexmark MS911 Service Manual page 59

Action
Step 14
Replace the motor (registration). See
page 310.
Does the problem remain?
Step 15
a
Check the feed belts for proper tension, and then adjust if necessary.
b
Check the feed gears and belts for wear or damage, and replace if
necessary.
Does the problem remain?
Step 16
Is the jammed paper from tray 1?
Step 17
a
Check the tray 2 transport drive belt for proper tension, and then
adjust if necessary.
b
Check the tray 2 transport drive gear and belt for wear or damage, and
replace if necessary.
Does the problem remain?
Step 18
a
Make sure that the paper feed drive assembly is properly installed.
b
Make sure that the paper feed drive assembly is clear of obstructions.
c
Check the paper feed drive for damage, and replace if necessary. See
"Feed drive assembly removal" on page
Does the problem remain?
Step 19
a
Make sure that the registration transport assembly is properly
installed.
b
Make sure that the registration transport assembly is clear of
obstructions.
c
Check the registration transport assembly for damage, and replace if
necessary. See "Registration transport assembly" on page
Does the problem remain?
Step 20
Make sure that the blue screws and marked screws in the paper path area
are tightened.
Does the problem remain?
"Motor (registration) removal" on
315.
231.
Diagnostic information
59
Yes No
Go to step 15. The problem is solved.
Go to step 16. The problem is solved.
Go to step 18 Go to step 17.
Go to step 18. The problem is solved.
Go to step 19. The problem is solved.
Go to step 20. The problem is solved.
Go to step 21. The problem is solved.
4021