Device Tests - Lexmark MS911 Service Manual

3000‑Sheet Tray Motor Tests
These tests verify that the 3000‑sheet tray motors are working properly.
1
Enter the Diagnostics Menu, and then navigate to:
Motor Tests > 3000‑Sheet Tray Motor Tests
2
Select a motor.
3
Check if the motor runs.
Staple Finisher Motor Tests
These tests verify that the staple finisher motors are working properly.
1
Enter the Diagnostics Menu, and then navigate to:
Motor Tests > Staple Finisher Motor Tests
2
Select a motor.
3
Check if the motor runs.
Staple and Hole Punch Finisher Motor Tests
These tests verify that the staple and hole punch finisher motors are working properly.
1
Enter the Diagnostics Menu, and then navigate to:
Motor Tests > Staple and Hole Punch Finisher Motor Tests
2
Select a motor.
3
Check if the motor runs.
Booklet Maker Motor Tests
These tests verify that the booklet maker motors are working properly.
1
Enter the Diagnostics Menu, and then navigate to:
Motor Tests > Booklet Maker Motor Tests
2
Select a motor.
3
Check if the motor runs.

DEVICE TESTS

Quick Disk Test
This test performs a non-destructive read/write test on one block per track on the disk. If the block is good, then the
saved data is written back to the disk.
1
Enter the Diagnostics Menu, and then navigate to:
DEVICE TESTS > Quick Disk Test
2
Exit the test.
Service menus
183
4021