Lexmark MS911 Service Manual page 57

Error code Description
200.16 The sensor (registration) did not detect the paper fed
from tray 1.
200.19 While feeding from tray 1, skew correction did not
complete at the registration roller.
200.91 Paper remains detected at the sensor (registration)
after the printer turned on.
200.92 Paper size error was detected.
200.93 While feeding from tray 2, tray 3 or tray 4, skew
correction did not complete at the registration roller.
200.99 The sensor (registration) did not detect the paper fed
from tray 2, tray 3, tray 4, or tray 5.
Registration jam service check
Action
Step 1
Enter the Diagnostics menu, and then navigate to:
EVENT LOG > Display Log
Do most of the recent error codes end with a 1? (Example: 241.11, 200.91)
Step 2
Make sure that the registration paper path, including the sensors, are free
of debris or dust.
Does the problem remain?
Step 3
Check the registration sensor actuator for damage, and replace if
necessary.
Does the problem remain?
Step 4
Check the sensor (registration).
Is it free of damage?
Step 5
Enter the Diagnostics menu, and then navigate to:
SENSOR TESTS > PRINTER SENSOR TESTS > Registration
Does the sensor status change while toggling the sensor?
Action
See "Registration jam service check" on page
Yes
Go to step 2.
Go to step 3.
Go to step 4.
Go to step 5.
Go to step 8.
Diagnostic information
57
4021
57.
No
Go to step 8.
The problem is solved.
The problem is solved.
Go to step 7.
Go to step 6.