200 Paper Jams - Lexmark MS911 Service Manual

Area name
Doors C and G, finisher bin
Area G, doors C, J, and H, finisher
bin

200 paper jams

[x]‑page jam, clear jammed paper from multipurpose feeder. [200.xx]
1
Remove all paper from the multipurpose feeder.
2
Remove the jammed paper.
3
Open door C to remove any paper fragments.
Note: Make sure that door C does not hit any cable attached to the printer.
4
Close door C.
5
Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the
edges on a level surface.
6
Reload the paper.
200 paper jam messages
Error code Description
200.06 The sensor (registration) did not detect the paper fed
from the MPF.
200.09 While feeding from the MPF, skew correction did not
complete at the registration roller.
Control panel message
[x]‑page jam, press latch to access area G.
Leave paper in bin. [40y.xx]
[x]‑page jam, open door H and rotate knob
H6 clockwise. Leave paper in bin. [426.xx–
428.xx]
Diagnostic information
56
What to do
Slide the staple finisher to the left, and then
remove the jammed paper.
Open door H, and then remove the jammed
paper.
Action
See "MPF jam service check" on page
4021
60.