Motor Tests - Lexmark MS911 Service Manual

Staple Finisher Sensor Tests
These tests verify that the staple finisher sensors are working properly.
1
Remove the tray inserts from tray 1 and tray 2.
2
Enter the Diagnostics Menu, and then navigate to:
SENSOR TESTS > Staple Finisher Sensor Tests
3
Select a sensor.
4
Manually toggle the sensor.
Note: The sensor status on the screen toggles between Open and Close when the sensor is working properly.

Motor Tests

PRINTER MOTOR TESTS
These tests verify that the printer motors are working properly.
1
Enter the Diagnostics Menu, and then navigate to:
Motor Tests > PRINTER MOTOR TESTS
2
Select a motor.
3
Check if the motor runs.
2x500‑Sheet Tray Motor Tests
These tests verify that the 2 x 500‑sheet tray motors are working properly.
1
Enter the Diagnostics Menu, and then navigate to:
Motor Tests > 2x500‑Sheet Tray Motor Tests
2
Select a motor.
3
Check if the motor runs.
2500‑Sheet Tray Motor Tests
These tests verify that the 2500‑sheet tray motors are working properly.
1
Enter the Diagnostics Menu, and then navigate to:
Motor Tests > 2500‑Sheet Tray Motor Tests
2
Select a motor.
3
Check if the motor runs.
Service menus
182
4021