Lexmark MS911 Service Manual page 67

4
Open the standard trays, and then locate the jammed paper.
5
Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
6
Close the trays and door C.
7
Slide the 3000‑sheet tray back into place.
202 paper jam messages
Error code Description
202.91 Paper remains detected at the sensor (exit)
after printer was turned on.
202.93 The sensor (fuser exit) did not detect the
paper.
202.95 Paper remains detected at the sensor (fuser
exit) during a print job.
Exit jam service check
Action
Step 1
Enter the Diagnostics menu, and then navigate to:
EVENT LOG > Display Log
Do most of the recent error codes end with a 1? (Example: 241.11, 200.91)
Step 2
Make sure that the exit paper path, including the sensors, are free of
debris or dust.
Does the problem remain?
Action
See "Exit jam service check" on page
Yes
Go to step 2.
Go to step 3.
Diagnostic information
67
4021
67.
No
Go to step 8.
The problem is solved.