Ozone Fan Duct Removal - Lexmark MS911 Service Manual

8
Disconnect the cable (D), and then remove the two screws (E).
9
Remove the fan.

Ozone fan duct removal

1
Remove the port access door. See
2
Remove the controller board access cover. See
3
Remove the engine board cover. See
4
Remove the scanner interface cable cover. See
5
Remove the upper rear cover. See
6
Open the controller board frame. See
7
Remove the ozone fan. See
The fan duct remains.
"Port access door removal" on page
"Controller board access cover removal" on page
"Engine board cover removal" on page
"Scanner interface cable cover removal" on page
"Upper rear cover removal" on page
"Controller board frame removal" on page
"Ozone fan removal" on page
Repair information
318
228.
289.
289.
305.
316.
4021
287.
286.