X 500-Sheet Tray 3 Transport Belts And Gears Removal - Lexmark MS911 Service Manual

5
Remove the five screws (A).
6
Disconnect the cable (B), and then remove the sensor.

2 x 500-sheet tray 3 transport belts and gears removal

1
Remove the rear right cover. See
2
Remove the jam access door. See
3
Remove the bottom right cover. See
4
Remove the tray 3 transport assembly. See
5
Remove the tray 4 transport assembly. See
"2 x 500-sheet tray rear right cover removal" on page
"2 x 500-sheet tray jam access door removal" on page
"2 x 500-sheet tray bottom right cover removal" on page
"2 x 500-sheet tray 3 transport assembly removal" on page
"2 x 500-sheet tray 4 transport assembly removal" on page
Repair information
382
4021
376.
375.
377.
377.
378.