X 500-Sheet Tray 4 Transport Assembly Removal - Lexmark MS911 Service Manual

4
Remove the assembly.

2 x 500-sheet tray 4 transport assembly removal

1
Remove the rear right cover. See
2
Remove the jam access door. See
3
Remove the bottom right cover. See
4
Disconnect the two cables (A), and then remove the four screws (B).
5
Remove the assembly.
Note: The following image shows the tray 3 transport assembly. The same movements apply when removing the
tray 4 transport assembly.
"2 x 500-sheet tray rear right cover removal" on page
"2 x 500-sheet tray jam access door removal" on page
"2 x 500-sheet tray bottom right cover removal" on page
Repair information
378
4021
376.
375.
377.