Paper Jams - Lexmark MS911 Service Manual

Action
Step 23
a
Make sure that the MPF is properly installed.
b
Check the MPF for damage, and replace if necessary. See
removal" on page 247.
Does the problem remain?
Step 24
Check the engine controller board pins for damage, and replace if
necessary. See "Engine controller board removal" on page
Does the problem remain?

202 paper jams

[x]‑page jam, open door C and clear all jammed paper. [2yy.xx]
1
Open door C. Make sure that it does not hit any cable attached to the printer.
2
Remove the jammed paper from any of the following locations:
Note: Make sure that all paper fragments are removed.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching it.
•
Fuser area
Yes
Go to step 24.
"MPF
Contact the next level
of support.
296.
Diagnostic information
63
4021
No
The problem is solved.
The problem is solved.