153 Errors - Lexmark MS911 Service Manual

Action
Step 5
Replace the motor (developer). See
page 308.
Does the problem remain?
Step 6
Check the developer for proper operation.
Is it working properly?
Step 7
Make sure that the cable is properly connected to the developer and to
the image controller board.
Does the problem remain?
Step 8
Check the developer for damage, and replace if necessary. See
unit removal" on page 283.
Does the problem remain?
Step 9
Check the engine controller board pins for damage, and replace if
necessary. See "Engine controller board removal" on page
Does the problem remain?

153 errors

153 error messages
Error code Description
153.00 The motor (transport) failed.
153.06 The motor (transport) did not run at the correct
timing.
"Motor (developer) removal" on
"Developer
296.
Diagnostic information
134
Yes
Go to step 6.
Go to step 9.
Go to step 8.
Go to step 9.
Contact the next level
of support.
Action
See "Motor (transport) failure service check" on
page 135.
4021
No
The problem is solved.
Go to step 7.
The problem is solved.
The problem is solved.
The problem is solved.