Setting The Default Admin Login Timeout Period; Setting The Contact Information; Setting The Service Phone Number - imagistics ipc1-im8130 Administrator's Manual

98
4 Click if you have not yet saved your changes.
Reset
This refreshes and restores the settings to their original states.

Setting the Default Admin Login Timeout Period

1 To be able to set the controller online or offline you must log
in using the administrator's password. This menu option does
not appear on the Preferences page if you have not logged in
or if the system has timed you out.
2 Click the
Preferences
3 Click the Admin Login Timeout Period drop-down arrow and
select the amount of time before the administrator login times
out.
The default is 20 minutes.
Note: You must be logged in as an administrator to access
this option.
4 Click to save your new settings.
Save
Click if you have not yet saved your changes and to
Reset
refresh and restore the settings to their original state.

Setting the Contact Information

1 Log in as an administrator.
2 Click the
Administration
3 Click the
Device
The Device window opens.
4 In the Properties area, enter the name or title of the contact
person for the device in the Contact Information field.
.
5 Click
Save

Setting the Service Phone Number

1 Log in as an administrator.
2 Click the
Administration
3 Click the
Device
The Device window opens.
4 In the Properties area, enter the phone number for service on
the device in the Service Phone Number field.
tab.
tab.
subtab.
tab.
subtab.
ipc1-im8130 Administrator's Guide